Material Safety Data Sheet

pricing page title image

Properties of metallised polyester film

General value of a standard 25 micron Polyester Glitter.

Mechanical Properties

  • Item

  • Tensile Strength
  • Elongation at Bank
  • Young's Modulus
  • Impact Strength
  • Tear Strength
  • Bursting Strength
  • Folding Endurance
  •  

  • MD
  • TD
  • MD
  • TD
  • MD
  • TD
  • -
  • MD
  • TD
  • -
  • -
  • Value

  • 23
  • 24
  • 120
  • 110
  • 450
  • 500
  • 35
  • 14.6
  • 15
  • 5.5
  • 1.5*10
  • Unit

  • Kg/mm2
  • Kg/mm2
  • %
  • %
  • Kg/mm2
  • Kg/mm2
  • Kg/cm2
  • g
  • g
  • Kg/cm2
  • Cycles
  • Test Condition

  • 25 C
  • 25 C
  • Atmosphere
  • Atmosphere
  • 25 C
  • MIT Method
  • Test Method

  • ASTM-D882A
  • ASTM-D1709
  • ASTM-D1922
  • ASTM-D1922
  • ASTM-D774
  • ASTM-D2176

Physical Properties

  • Item

  • Density
  • Water Absorption
  • Water Vapor Permeability
  • Oxygen Permeability
  • Value

  • 1.4
  • 0.45
  • 23
  • 45
  • Unit

  • g/m2
  • %
  • g/m2/24hr
  • cc/m2/24hr/atm
  • Test Condition

  • 25 C
  • 25 C ,24hr
  • 40 C,90% RH
  • 24 C, 1atm
  • Test Method

  • ASTM-D1505
  • ASTM-D570
  • ASTM-E96
  • ASTM-D1434

Optical Properties

  • Item

  • Melting Point
  • Service Temperature
  • Heat Shrinkage
  • Thermal Expansion Coefficient
  • Thermal Expansion Coefficient
  • Specific Heat
  •  

  • -
  • -
  • MD
  • TD
  • -
  • -
  • -
  • Value

  • 260
  • -70 ~ 150
  • 1.5
  • 0.5
  • 3x10
  • 3x10
  • 0.32
  • Unit

  • -
  • -
  • 150 C/30min
  • -
  • 10~50 C
  • 25 C
  • Test Condition

  • -
  • -
  • 150 C/30min
  • 10~50 C
  • -
  • 25 C
  • Test Method

  • TSI Method
  • -
  • ASTM - D2305
  • ASTM - D696
  • -
  • -

Physical and chemical data

  • Melting Point
  • Boiling Point
  • Colour
  • Heat of Combustion
  • Vapor Pressure (mmHg at 20 C)
  • Vapor Density ( air = 1)
  • Solubility Gravity
  • PH
  • Specific Gravity
  • Appearance
  • Odour
  • 255 ~ 265 C (491 ~ 477 F) MD
  • Not applicable
  • Clear, Hazy, White ,Yellowish
  • 23.5 MJ/Kg
  • Negligible
  • Not applicable
  • Insoluble
  • Not applicable
  • 1.40 g/cm
  • Film
  • Odourless

Fire and Explosion Hazard data

  • Flash Point
  • Autoignition Temp
  • Flammable Limits (STP)
  • Extinguishing Media
  • Special Fire Fighting Protective Equipment
  • Unusual Fire and Explosion Hazards
  • 346 ~ 399 C (655 ~ 750F)
  • No data
  • Not applicable
  • Water Spray ,Carbon Dioxide ,Dry Chemical,Halogenated Agents.
  • Self-contained breathing apparatus with fullpiece and protective clothing.
  • Film remaining in contact with flame will ignite and continue to burn slowly, dropping flaming liquid which can spread the fire. If the flame source is stationary, the fire will shrink away and self-extinguish

Reactive data

  • Stability
  • Incompatibility (Materials to Avoid)
  • Hazardous Decomposition Products
  • Hazardous Polymerization
  • Health Hazard Assessment
  • Stale under normal considers.
  • Not applicable.
  • Combustion products: Carbon Dioxide, Carbon Monoxide ,Terephthalic Acid, Aldehdes
  • Will not occur.

General

  • The health Hazard assessment is based on an evaluation of the chemical composition together with information from a search of the scientific literature and other commercial sources

Ingestion

  • Not suitable for human consumption.

Eye Contact

  • No irritation is likely to develop following contact with human eyes.

Skin Contact

  • No irritation is likely to develop following contact with human skin.

Skin absorption

  • This product will probably not be absorbed through human skin. .

First Acid procedures

  • No toxic effects are known to be associated with inhalation of dust from this material.

Skin

  • Wash material off the skin with plenty of soap and water. If redness, itching or a burning sensation develops, get medical attention.

Eye

  • Immediately flush with plenty of water .After initial flushing ,continue flashing for at least 15 minutes . If redness, itching or a burning sensation develops, have eye examined and treated by medical personnel.

Ingestion

  • Give one or two glasses of water to drink. If gastrointestinal symptoms develop, consult medical personnel.

Inhalation

  • Remove victim to fresh air .If cough or other respiratory Systems develop, consult medical personnel.

Precautions for safe handling and use

  • Steps to be taken in case material is released or spilled: Collect for reuse or disposal. Disposal Method: Observe all federal, state and local laws regarding health and pollution.

Control Measure

  • 1) Respiratory Protection ( Specify Type): None should be needed.
  • 2) Ventilation:
    Local Exhaust : Not applicable
    Other : Not applicable
  • 3) Protective Clothing: None should be needed
  • 4) Eye Protection: Not applicable
  • 5) Other Protective Equipment: one should be needed

NOTE: This MSDS is true but only for information, which doesn't means all coverage related to the product safety matters. Glitron Products doesn't take the responsibility of all damages due to these products.